Down The Hole (DTH) Hammers, Drills and Bits
Reverse Circulation RC drilling hammers and hammer drill bits RE543
RE542 RC Hammer
Roschen is the world's leading designer and manufacturer of rock
drilling equipment for drilling holes from 3 ½ – 48 inches (89 –
1219mm) in diameter.
RC Hammers
Reverse Circulation Hammers
REVERSE CIRCULATION DRILLING HAMMERS
Reverse Circulation RC drilling hammers and hammer drill bits
provide outstanding performance along with outstanding reliability
and simplicity. Our reverse circulation hammers are suitable for
any exploration and grade control process to obtain an accurate
sample with no contamination. RC drilling hammers can in most
instances carry out continuous sample collection in a fraction of
the time necessary with conventional or wireline coring.
Reverse circulation drilling is similar to air core drilling. The
cuttings are returned to the surface through an inner tube and
collected for later use. This type of drilling is done by either
rotary drilling or percussion drilling with the aid of a down hole
hammer. Reverse circulation drilling is a highly utilized drilling
method for mineral exploration. RC is used to retrieve continuous
samples from the ground where a solid core is not needed.
In RC drilling, air, or sometimes water, is pumped into a side
inlet air swivel. The air is then blown down the outside of the
pipe. Once the air hits the drill bit, it flushes and cools the air
but also creates a vacuum that forces the air and cuttings up the
center of the drill string and into the inner tube. The air then
goes back up the drill pipe through the top drive and into a
cyclone sampler. Western Drilling Tools manufactures all of its own
RC equipment. The RC equipment is compatible with most others on
the market.
A major advantage of reverse circulation drilling is continuous
uncontaminated samples.
Roschen also manufactures a complete line of rc tools and
accessories. Feel free to contact Roschen for more information on
RC drilling, custom rc drilling tools and custom drilling tools.
| ROSCHEN RC Hammers Specifications |
| Hammer Size | Hammer | Bit Shank | ROSCHEN Code | Hole Range (mm) | External Diameter (mm) | Length (without bit) mm | Weight (N.W.) kgs | Connection Thread | Working Pressure |
| 3" | RE531 | RE531 | ROS RC 30 | 84-100 | 81 | 1069 | 29 | 3“ Remet | 1.0-3.0Mpa |
| 3" | RE035 | RE035 | ROS RC 35 | 84-105 | 85 | 1075 | 35 | 3“ Remet | 1.0-3.0Mpa |
| 4 1/2" | RE004 | RE004 | ROS RC 40 | 111-127 | 107 | 1252 | 52 | 3.5"-4" Remet 4" Metzke | 1.0-3.0Mpa |
| 4 1/2" | RE540 | RE540 | ROS RC 45 | 111-127 | 107 | 1252 | 52 | 3.5"-4" Remet 4" Metzke | 1.0-3.0Mpa |
| 5" | RE040 | RE040 | ROS RC 50 | 113-130 | 109.5 | 1191 | 57 | 3.5"-4" Remet 4" Metzke | 1.0-3.0Mpa |
| 5" | RE542 | RE542 | ROS RC 50 | 113-130 | 109.5 | 1191 | 57 | 3.5"-4" Remet 4" Metzke | 1.0-3.0Mpa |
| 5" | RE543 | RE543 | ROS RC 50 | 120-135 | 116 | 1191 | 62 | 3.5"-4" Remet 4" Metzke | 1.0-3.0Mpa |
| 5" | RE545 | RE545 | ROS RC 50 | 122-135 | 117.5 | 1261 | 65 | 4"-4.5"Remet 4"-4.5" Metzke | 1.5-3.5Mpa |
| 5 1/2" | RE547 | RE547 | ROS RC 55 | 130-146 | 124.5 | 1270 | 71 | 4.5"Remet 4.5" Metzke | 1.5-3.5Mpa |
| 5 1/2" | RE052 | RE052 | ROS RC 55 | 130-146 | 124.5 | 1270 | 71 | 4.5"Remet 4.5" Metzke | 1.5-3.5Mpa |
| 5 3/4" | RE054 | RE054 | ROS RC 55 | 130-146 | 124.5 | 1270 | 85 | 4.5"Remet 4.5" Metzke | 1.5-3.5Mpa |
| 5 3/4" | RE140 | RE140 | ROS RC 55 | 130-146 | 124.5 | 1270 | 85 | 4.5"Remet 4.5" Metzke | 1.5-3.5Mpa |
| 5" | PR40 | PR40 | ROS RC 50 | 124-142 | 120.5 | 1362 | 80.5 | 3.5"-4.5" Remet 3.5"-4.5" Metzke | 1.5-3.5Mpa |
| 5 1/2" | PR52 | PR52 | ROS RC 55 | 126-142 | 121 | 1227 | 68.5 | 4"-4.5"Remet 4"-4.5" Metzke | 1.5-3.5Mpa |
| 5 1/2" | PR52R | PR52/PR52R | ROS RC 55 | 130-146 | 124 | 1225 | 65 | 4"-4.5"Remet 4"-4.5" Metzke | 1.5-3.5Mpa |
| 5 1/2" | PR54 | PR54 | ROS RC 55 | 135-150 | 130 | 1294 | 84.5 | 4.5"Remet 4.5" Metzke | 1.5-3.5Mpa |
| 6" | MX5456 | MX5456 | ROS RC 60 | 136-150 | 132 | 1362 | 90 | 4.5"Remet 4.5" Metzke | 1.5-3.5Mpa |
| 6"~6 1/2" | RC62/RC62R | RC62/RC62R | ROS RC 65 | 152-190 | 146 | 1320 | 110 | As Request | 1.5-3.5Mpa |
| 8" | RC82/RC82R | RC82/RC82R | ROS RC 80 | 190-250 | 180 | 1395 | 185 | As Request | 1.5-3.5Mpa |
| 10" | RC100/RC100R | RC100/RC100R | ROS RC 100 | 250-370 | 240 | 1528 | 328 | As Request | 1.5-3.5Mpa |
| Notes: |
| Metzke, Remet thread is available! |
| Any special type shank of RC Hammer will be available by requests. |
Keywords:
RC Hammers
Reverse Circulation hammers
boart longyear Reverse Circulation hammers
Reverse Circulation hammers
reverse circulation swivel
what is reverse circulation drilling
reverse circulation drill pipe
dual tube reverse circulation drilling
Reverse Circulation RC Hammers
Reverse Circulation Hammers and Bits
Reverse Circulation Hammers & Bits
RC Drill Hammers
Reverse Circulation RC Drilling
Reverse Circulation DTH Hammer
Down the Hole Drilling Tools
Reverse Circulation Hammer
Rock drilling tools
reverse circulation swivel
what is reverse circulation drilling
reverse circulation drill pipe
dual tube reverse circulation drilling
Reverse Circulation Drill Rods
Reverse Circulation Drill Rod
Reverse Circulation Drill Rigs
Reverse Circulation Drill Rigs for sale
Reverse Circulation Drill Rigs for sale used
dual tube reverse circulation drilling
reverse circulation drilling process
reverse circulation drill pipe
what is reverse circulation drilling
matrix drill pipe
reverse circulation bits
dual wall reverse circulation drilling
reverse air drilling
Reverse Circulation RC Drill Rods
Reverse Circulation RC Drilling Rods
Reverse circulation rods - Technidrill
Reverse Circulation Drill Rods and Pipe
Related searches for Reverse Circulation Drill Rods
dual tube reverse circulation drilling
reverse circulation drilling process
reverse circulation drill pipe
what is reverse circulation drilling
matrix drill pipe
reverse circulation bits
dual wall reverse circulation drilling
reverse air drilling
Dual Tube Drill Rod
Reverse Circulation Drilling
Dual Tube Drill Rod for Reverse Circulation Drilling for sale
Premium Reverse Circulation Drilling Pipes
Reverse Circulation Drilling Pipe, reverse circulation pipe,
Reverse Circulation Well Drilling Pipe, rc drilling pipe, drilling
pipe, drilling rod, dual tube drilling pipe
Reverse Circulation Performance Tooling
Reverse Circulation Drill Rods 4 in OD
Reverse Circulation Pipe
Reverse Circulation Drilling
Reverse Circulation
Reverse Circulation Drilling with Patented Grout Through
Reverse Circulation Drilling Programs
Reverse Circulation (RC) Drilling
Reverse Circulation rods
Reverse Circulation rotary drilling
reverse circulation swivel
what is reverse circulation drilling
dual tube reverse circulation drilling
reverse circulation drill pipe
FAQ
Terms & Conditions of Ordering:
Quality warranty:
Our products are made of high quality steel and all spares parts
are inspected strictly before shipping. We have quickly responses
for your complaint and suggestion.
Package:
Using ply-wooden cases and pallet for package to protect the
products and avoid the damage during transportation. Also we can
customize package according to your special requests.
Production time:
Generally need 15-25 days
Transportation:
By air, By Express or By sea according to your requests.
1. Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight
2. Handling time for an order
Based on order quantity, normally it takes 20 days for production.
in 3 working days after receiving the advance payment
3. Shipping way
Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or
by air
Bulk order: we suggest by air or by sea.
4. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before
shipping out.
5. After Services:
a. Our sales team will response for your question within 24 hours
(Holidays Excluded)
b. Technical Support will be available in any time
6. Quality & Service:
A. There will be strict inspection and testing for every order
before shipping out.
B. Our sales team and Technical Support will response for your
question within 24 hours through skype: ROSCHEN.TOOL and
WhatsApp/Wechat: +86-13764195009
C. Free replacement will provide once the failure confirmed caused
or our product quality; Not satisfied with a refund.
For more information, please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschen.com ; http://www.roschen.net
http://www.roschen.cn ; http://www.roschendrill.com
http://www.roschenmining.com ; http://www.roschendrilling.com
