Three Roller Tricone Drill Bit 8 1/2 inch for Hard Rock Drilling

Discriptions:

Tricone bit is an important tool for oil drilling, its performance will have a direct impact on drilling quality, drilling efficiency and drilling costs. Tri-cone bit design is based on practical experience, combined with trial and error method, repeated design and calculation, the design accuracy is low, long cycle, it is difficult to improve the design quality, and each calculation can only design a drill, low efficiency.

Three roller bit size profile

3 7/8 (98 mm) 7 1/2 (190 mm) 10 5/8 (269 mm) 16 (406 mm) 800 mm 4 5/8 (118 mm) 7 7/8 (200 mm) 11 5/8 (295 mm) 17 1/2 (445mm) 900mm 5 7/8 (149mm) 8 1/2 (216mm) 12 1/4 (311mm) 26 (660mm) 1200mm 6 (152mm) 9 1/2 (241mm) 13 5/8 (346mm) 500mm 6 1/2 (165 mm) 9 7/8 (250 mm) 15 1/2 (393 mm); 600 mm

Precautions for use:

a. Do not touch the roller bit gear when connecting and unloading the bit.

b. to keep the mud clean to prevent blocking bit of water eye, which affects the drill bit.

c. drill speed control to prevent sudden resistance, so that the roller cone drill to play a better effect.

d. Keep both pumps in good condition.

e. keep the bottom of the well clean, from the drill, drill into the mud scraper or cover the wellhead with steel, often check the pliers and pinhole insurance sales tools to prevent wellhead falling objects.

f. pay attention to the drill to prevent slippery drilling, Dun drilling.

g. Encountered a bizarre drilling, drilling time to adjust the drilling parameters.

h. Drill bit drill to the end, the first cycle of about 10 minutes, with 1-2 tons into about 0.5 meters, slowly pressurized to 6-8 tons of drilling. Drill evenly to prevent sudden damage to the vent, drill pressure generally not more than 10 tons. When you encounter slow drilling, to analyze, if it is because of the mezzanine to be patient, do not blindly add drill pressure.

Tri-cone drill bit is one of the most widely used drilling bit, with wide adaptation to the ground, the high penetration rate of the characteristics of the machine. Tricone bit from the cutting structure, bearing structure, locking components, oil seal, nozzle devices, such as more than 20 kinds of components. Tricone bit classification

1. Bearing Type: Rolling and plain bearings

2. Sealing type: rubber seal and metal seal

3. According to the fixed teeth are divided into: Indentation (carbide teeth) Tricone bit and milling gear (steel teeth) Tricone bit

Working principle:

Tricone bit in the weight-pressure and drill string rotation under the action of teeth crushed and eat into the rock, while sliding to produce some shear and rock. When the roller cone in the bottom of the scroll, the teeth on the cone impact in turn, into the formation, this role can be part of the rock bottom crushing, while the role of the roller along with the shearing effect of cutting away the residual teeth between the other Part of the rock, so that the bottom of the rock completely broken, the well can be extended.

Product advantages:

Drill bits are the most widely used in oil drilling and geological drilling. Tricone bits have the effect of rocking, crushing and shearing the formation rock during rotation. Therefore, the roller cone bit can adapt to various soft, medium and hard formations. Especially after the emergence of jet-type roller bits and long-nozzle roller cone bits, the roller bit drilling speed is greatly increased, which is a major revolution in the development of roller cone bits. Tricone bit by tooth type can be divided into milling teeth (steel teeth) roller bit, insert the tooth (carbide roller gear set) roller bit; according to the number of roller can be divided into single cone, double cone , Tricone and multi-roller bit. The most widely used at home and abroad, the most common is the tricone bit.

Rock drill bits are an essential part of the oil, exploration and drilling industries, but roller cone bits are too expensive for some drilling industries, prompting some drilling industries to produce large secondary roller cone bits Interest, its low price and reliable quality (only 1/3 of its lifespan is used in oil drilling) reduce the cost of the drilling industry so that used roller bits have become an important part of some of the drilling industry.

For Example

FJ517G three roller bit

Product category: Drilling, exploration, petroleum, bit, drilling accessories

Product Name: 215.9mm Jianghan metal inlaid three roller cone bit

Product Type: FJ517G

Structural features:

1. Floating bearing structure, the floating element by the high strength, high elasticity, high temperature resistance, high wear resistance characteristics of new materials, the surface of the solid lubricant treatment. Reducing the relative linear velocity of the bearing pair reduces the temperature rise of the friction surface, which can effectively improve the bearing life and bearing reliability under high-pressure or high-speed drilling conditions.

2 using high-precision metal seal. Metal seal consists of a well-designed metal seal ring as the bearing axial dynamic seal, two high-elasticity rubber energizing ring are located in the tooth palm and cone sealing area as a static seal, the optimized seal compression to ensure that two A metal ring sealing surface always maintain good contact.

3. Ball locking cone, to adapt to high speed.

4. With a full rubber reservoir that limits differential pressure and prevents drilling fluid from entering the lubrication system, it provides a good lubrication guarantee for the bearing system.

5. Adopt new grease that is resistant to high temperature of 250 ° C and anti-wear.

6 inserts with high strength and toughness carbide teeth, the optimal design of the number of teeth rows, teeth, tooth height and unique alloy tooth profile, give full play to the high wear resistance and excellent cutting ability of the bit. Steel tooth bit tooth surface welding new wear-resistant materials, while maintaining the high penetration rate of steel bit drilling while improving the bit cutter life.

Rubber seal tricone bit

Product introduction: H series drill is O-shaped rubber sealed sliding bearing bit, which can withstand higher weight-on-bit at normal speed.

Product category: Drilling, exploration, petroleum, bit, drilling accessories

The main structural features:

1. The use of high strength and toughness carbide teeth, improve the impact resistance of teeth to reduce the broken tooth rate;

Optimized design of the number of teeth, the number of teeth, tooth height and unique alloy tooth profile, give full play to the bit cutting ability and cutting speed;

3. Using snap-lock locking cone, can withstand high-pressure drilling;

4 cone weld inlay reduction alloy, improve anti-bite bearing capacity;

5. The use of highly saturated nitrile rubber O-ring, the optimized seal compression increases the bearing seal reliability;

6. Adopting a full rubber oil storage bag that can limit the pressure difference and prevent the drilling fluid from entering the lubrication system, providing good lubrication for the bearing system and ensuring the normal working of "O" ring seal and improving the working life of the drill bit;

7. With 250 ℃ high temperature, low wear and tear of the new grease to improve the drill seal lubrication system high temperature capability.

For more information please contact:

ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED

Skype: ROSCHEN.TOOL , ROSCHEN_GROUP

WeChat: +86-137 6419 5009 ; +86-135 8585 5390

WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390

Email: roschen@roschen.com ; roschen@roschen.net

Website: http://www.roschen.com ; http://www.roschen.net

http://www.roschen.cn ; http://www.roschendrill.com

Keywords:

tricone roller bit
Tricone Roller Cone Drill Bits
Tricone Rock Bits
water well rock bits
roller bits for sale
tricone rock bit
cone drill bits
tricone drill bit
hughes tricone bits
roller cone drill bits
rock bit sizes
TRI-CONE DRILL BITS - ROLLER CONE BITS 3" 4" 6" 8 ..
tricone bit roller bit drill bit
Tricone Rock Roller Bits - Manufacturers, Suppliers
Tricone Drill Bits, Roller Cone
Tri-Cone Drill Bits
Tricone Bit: Drilling Equipment
roller cone bit
tricone bit
tricone bits
tricone bits iadc 537
tricone bits for sale
tricone bit sizes
tricone bit chart
tricone bit company
tricone bit assembly
tricone bit sales
tricone bits
tricone bits manufacturer
tricone bits for sale on craigslist
tricone bits supplier
tricone bits in houston
tricone bits on craigslist
tricone bit for well drilling
used tricone bits craigslist
tricone bit weight
tricone drill bits
tricone rock bit
hughes tricone bits
cone drill bit
tci tricone bit
Tricone bit for well drilling (medium worn-out)
PDC bit for well drilling
Multiple Tricone Bits
Tricone Bit
Drill Bit
Well Drilling Bit
Drilling Rig
Rock Drill Bits
Water Well Bit
Oil Drill Bit
Well Drilling
Well Drilling Equipment
Water Well Drilling Rig
Tricone Bit Sale
Blowout (well drilling)
Drilling mud
Drilling rig
Driller (oil)
Deep well drilling
Underbalanced drilling
Water well
Manual well drilling methods
Baptist well drilling
Sludging
Tri cone Bit
Tricone Bits Suppliers
Tricone Bits Manufacturers
China Tricone Bits Suppliers
China Tricone Bits Manufacturers
Tricone Bits Suppliers in China
Tricone Bits Manufacturers in China
Tricone Bits
Tricone Bits Suppliers
Tricone Bits Manufacturers
Tricone Rotary Drill Bits
tricone drill bits for sale
tricone bit for well drilling
tricone bit weight
used tricone bits craigslist
tricone bits for sale
tci tricone bit
hughes tricone bits
tricone drill bit
Tricone Rock Bits
Tricone Bit
Tricone Drill Bits
American Tricone Bits
Baker Hughes Tricone Roller Cone Drill Bits
America Drilling Supply
America West Drilling Supply
Drilling Supply
Exploration Core Drilling
tricone drill bits for sale
tricone bit for well drilling
tricone bit weight
used tricone bits craigslist
tricone bits for sale
tci tricone bit
hughes tricone bits
tricone drill bit
Tricone Rock Bits
Tricone Bit
Tricone Drill Bits
American Tricone Bits
Baker Hughes Tricone Roller Cone Drill Bits
America Drilling Supply
America West Drilling Supply
Drilling Supply
Exploration Core Drilling

For more information, please contact:

Skype: ROSCHEN.TOOL , ROSCHEN_GROUP

WeChat: +86-137 6419 5009 ; +86-135 8585 5390

WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390

Email: roschen@roschen.com ; roschen@roschen.net

Website: http://www.roschen.com ; http://www.roschen.net

 ROSCHEN GROUP

ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mineral tools, equipment products quality stable and reliable.

ROSCHEN Group Limited is a manufactory with years of research and development for the mining, mineral tools, equipment. We are capability to produce high performance world class products and control excellent quality. Our main product includes tricone bit, diamond core bits, drill pipe, core barrel, TCI tricone bit, mill tooth tricone bit, RC hammer, DTH bit, etc.

ROSCHEN Manufactory PROCESS

ROSCHEN Sales Value Growing Up!

ROSCHEN'S MISSION

1. Strive to create and supply Best quality products for the industry that last longer than the average products.

2. Provide excellent service for our clients.  24 hour-7 days /week schedule to get our clients what they need – FAST.