7 1/8” Core Barrel, Corpro Core Barrels Coring 4” size of core
sample for Oil Drilling
Coring tool
Coring tools, drill to take rock core drilling tools used. In order
to improve the rock mining rate and quality, different types and
structures of coring tools, such as single tube, double tube and
triple tube coring tools, local countercircular coring tools ,
Sometimes with special coring tools that take non-perturbed
samples. The company is located in:
Discipline: Drilling Engineering
Drilling coring tools
In the process of drilling using special coring tools to get the
underground rock lumps to the ground up, the block rock called the
core, through which you can determine the various properties of
rock, intuitive study of underground structures and rock
depositional environment , Understand the nature of the fluid and
so on.
Coring bit: used to drill core
Outside the core tube: boring pressure, torque transmission
Core barrel: storage, protection of the core
Take the definition of core
In the process of drilling using special coring tools to get the
underground rock lumps to the ground up, the block rock called the
core, through which you can determine the various properties of
rock, intuitive study of underground structures and rock
depositional environment , Understand the nature of the fluid and
so on.
Drilling coring tools advantages:
Drilling coring tools
1. Coring bit: used to drill core;
2. Outside the core tube: boring pressure, torque transmission;
3. The inner core tube: storage, protection of the core;
4. Core pawl: cut off, support, remove the core;
5. There are hanging bearings, sub-water head, back pressure
Versaili, centralizers and so on.
| Oil Core Barrel Range |
| Size | (in) | 4 3⁄4 x 2 9⁄16 | 5 3⁄4 x 3 1⁄2 | 7 1⁄8 x 4 | 8 5⁄8 x 5 1⁄4 | 9 1⁄2 x 5 1⁄4 |
| Thread Type | | ROSCHEN HD | ROSCHEN HD | ROSCHEN HD | ROSCHEN HD | ROSCHEN HD |
| Rec. Hole Size | (in) | 5 3⁄4 - 61⁄2 | 6 1⁄2 - 8 | 8 - 9 1⁄4 | 9 1⁄4 - 11 | 11 - 12 1⁄4 |
| Core Size | (in) | 2 9⁄16 | 3 1⁄2 | 4 | 5 1⁄4 | 5 1⁄4 |
| Top Connection | | 3 1⁄2 IF | 4 1⁄2 FH | 4 1⁄2 IF | 6 5⁄8 REG | 6 5⁄8 REG |
| Outer Tube | (in) | 4 3⁄4 x 3 3⁄4 | 5 3⁄4 x 4 5⁄8 | 7 1⁄8 x 5 5⁄8 | 8 5⁄8 x 7 | 9 1⁄2 x 7 |
| Unit Length | (in) | 20 | 20 | 20 | 20 | 20 |
| Pulling Capacity | (lbs) | 300000 | 515000 | 860000 | 960000 | 1550000 |
| Make-Up Torque | (ft lbs) | 7500 | 9500 | 30000 | 35000 | 45000 |
| Max. Torque | (ft lbs) | 25000 | 35000 | 70000 | 75000 | 120000 |
Benefits:
• Transfer of power through core-barrel to core-head without losses
due to buckling
• Higher torsion and tensile strengths than any alternative systems
in the market place
• Stabilizers positioned at 20ft intervals improve hole gauge and
concentricity
• ROSCHEN Tandem and Extended Tandem Assemblies promote increased
success in high angled wells
corpro houston
corpro coring
corpro insurance
corpro als
corpro cortland
For more information, please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschen.com ; http://www.roschen.net
http://www.roschen.cn ; http://www.roschendrill.com
http://www.roschenmining.com ; http://www.roschendrilling.com
