Slotted Pipe, Carbon Steel Tube, Oil screen tube control sand
Coring Drilling
CASING,PIPE, DRAIN, SLOTTED, LONGITUDINAL,SMLSO.D= 10-3/4"
WT=0.450" LENGTH=R3 MATERIAL: Grade K55 9 SLOTS PER FILE, OF 1/2"
WIDTH x 2.5" LENGTH. 4 FILES EACH 12", 13 FILES PER METER
THREAD: FLUSHMAX-, 10-3/4” , 5TPI OR EQUIVALENT : ( BTC)
Completely flush OD & ID Thread seal connection:Same thread form as
SUPERMAX2° load and 45° stabbing angle Tension:Connectionyield load
is 60% of the pipe body yield load Compression: More than 60% of
pipe body yield Internal pressure: 80% of pipe body internal yield
pressure Collapse: API Collapse pressure Application: CASINGor
SLOTTED CASING
Oil screen tube
The main function of the oil screen is to control the sand. The
different geologic environment (different lithology) in the well
leads to the different grades and types of screens used.
Oil screen overview
The type of oil screen
1. Slotted screen tube
2. Drilling screen
Wire around the screen
4. Bridge screen
5. Compound screen
The characteristics of oil screen
1. Oil screen with J55 or N80 oil casing body processing, high
strength, not easy to deformation
2 kerf edge perpendicularity is good, trimming smooth, burr-free,
kerf uniform.
3. Large flow area, 27/8 "screen 300 kerfs / 1.5m, flow area of
72 per cubic centimeter, than the specifications of the tubing
flow area 2.4 times greater. Will help liquid flow.
4. The advantages of using inclined shafts and horizontal wells are
more obvious.
5. The overall anti-corrosion treatment, the surface of the screen
to form a dense protective layer to improve the corrosion
resistance of the screen and wear resistance, which can effectively
extend the life of their work underground.
6 for sanding sand diameter greater than 0.3mm sand control sand.
7. Simple operation, easy to use, large diameter, easy to configure
the tube string
Oil screen main technical parameters:
Pipe Category: oil casing, tubing;
Pipe length (single): ≤ 15m;
Pipe diameter: 50 ~ 500mm (length ≤ 15m),
Wall thickness: ≤20mm;
Seamless width: (0.10 ~ 4) mm ± 0.03mm;
Number of seams: any
Cloth seams types: parallel, staggered, spiral
Sewing table: any.
Application Status of Laser Cutting Oil Screen:
In oil drilling operations, sieve pipe is an important equipment,
often using pre-completion or oil sand control. Currently, the use
of more screen is around the wire screen. The sieve is manufactured
by winding a wire of a certain cross-section on a metal liner
uniformly distributed on a sieve rod or an open hole, and welding
the wire with a certain gap as a sieve hole. Although this method
of manufacture has been used by many manufacturers in China, there
are some problems with this type of screen pipe when it goes down,
especially when it is forced to bend through a bend or a horizontal
well, it inevitably needs to be connected with a well wall or a
sleeve Tube collision, extrusion and friction, prone to chaos
phenomenon, resulting in damage to the screen or gap deformation,
resulting in completion of the quality and the effect of sand
control to reduce or failure, in view of the drawbacks of silk
screens, pipe, seam cutting Screen pipe appeared. Due to its
superior performance and low cost, kerf pipes are highly regarded
and widely adopted by major oil fields. It can be seen that the
emergence of kerf pipes provides the material conditions for the
development of horizontal and lateral drilling wells and the oil
recovery of the high sand reservoir.
| API Standard Casing |
| Size(mm) | Wall thickness(mm) | Weight per meter kg/m | ID (mm) | Length (m) | Slot Length(mm) | Slot No. No/m | Slot width (mm) | Slot Tolerance | Valid Filter Area cm/m | Max.Strength (kn) |
| 60.32 | 5 | 6.84 | 50.3 | 3 | 80 | 200 | 0.3 | ±50 | 48 | 512.54 |
| 73.02 | 5.5 | 9.15 | 62 | 240 | 57.6 | 688.55 |
| 88.9 | 6.5 | 13.22 | 75.9 | 280 | 67.2 | 995.1 |
| 101.6 | 6.5 | 15.22 | 88.6 | 300 | 72 | 1151.2 |
| 114.3 | 7 | 18.47 | 100.3 | 10 | 320 | 76.8 | 1400.4 |
| 127 | 7.52 | 22.13 | 112 | 340 | 81.6 | 1673.8 |
| 139.7 | 7.72 | 25.11 | 124.3 | 360 | 86.4 | 1900.2 |
| 9.17 | 29.48 | 121.4 | 360 | 86.4 | 2232.4 |
| 168.3 | 8.94 | 35.09 | 150.4 | 400 | 96 | 2672.95 |
| 177.8 | 8.05 | 33.68 | 161.7 | 440 | 105.6 | 2559.2 |
| 9.19 | 38.19 | 159.7 | 440 | 105.6 | 2940.7 |
slotted drain pipe
slotted pipe manufacturers
schedule 40 pvc slotted pipe
slotted pvc pipe suppliers
slotted pvc drain pipe
slotted pipe specifications
hdpe slotted pipe
slotted steel pipe
For more information, please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschen.com ; http://www.roschen.net
http://www.roschen.cn ; http://www.roschendrill.com
http://www.roschenmining.com ; http://www.roschendrilling.com
