Atlas Copco Drifter Bits
Altas Copco Drifter Bits T35 Tools System Enable 54 or 57mm holes
Using T38 Stiffer Rods
Atlas Copco bits for drifting and tunneling are available in four
basic designs
The right solutions for increased productivity
A Roschen T35 tool system enables 54 or 57 mm holes to be drilled
using the same stiffer rod dimension as for t38.
Roschen GT60 enables drilling of holes down to 92 mm. By using a
GT60 tool system when drilling the typical t51 hole size (102 mm),
hole straightness can be greatly improved–thanks to the much
stiffer and stable rod package.
A drill string with Halco Mf-rods offers stiffer connections than a
string with separate coupling sleeves due to the 50 % reduction in
thread play
Benefits with Halco Tools In Bench Drilling:
1. Reduced consumption of explosives, which accounts for 40 – 50 %
of the total drilling and blasting cost.
2. Longer service life of drill steel components reducing the
drilling tool cost.
3. Improved safety–better blasting control.
4. Less downtime–improved productivity.
5. Less hole deviation which gives more well balanced fragmentation
and thereby higher productivity in crushers.
6. Using Halco rock tools gives a lowered total operating cost.
Features:
Type 52
Designed for maximum bit life in hard and abrasive rock
Type 53
All-round design with a good trade off between speed and bit life
length for hard to medium hard rock
Type 54
All-round design with high penetration rate for hard to medium hard
rock
Type 55
Designed for maximum penetration rate in softer and less abrasive
rock formations
Our GT60 bench and production rock drilling tools , thread button
bits are designed to comply with all kinds of rock formations and
drilling site conditions, with longer life, higher penetration
rates etc..
Specifications:
Material: Alloy steel bar 45CrNiMoV and tungsten carbide tips YK05
Body type: Normal body or retrac body
Thread type: R22, R25, R28, R32, R38, T38, T45, T51, ST58, ST68,
GT60
Diameter: 32mm-127mm
Button bit shape: spherical and ballistic
Face shape: Flat shape and drop-center shape
Technique parameter:
Main threaded button bits specifications:
R22-32mm, R22-36mm, R22-38mm, R22-41mm;
R25-33mm, R25-35mm, R25-37mm, R25-38mm, R25-41mm, R25-43mm,
R25-45mm;
R28-37mm, R28-38mm, R28-41mm, R28-43mm, R28-45mm, R28-48mm;
R32-41mm, R32-43mm, R32-45mm, R32-48mm, R32-51mm, R32-54mm,
R32-57mm, R32-64mm, R32-76mm;
T38-64mm, T38-70mm, T38-76mm, T38-89mm, T38-102mm, T38-127mm;
T45-76mm , T45-89mm, T45-102mm;
T51-89mm, T51-102mm, T51-115mm, T51-127mm;
GT60-92mm, GT60-96mm, GT60-102mm, GT60-115mm, GT60-118mm,
GT60-127mm, GT60-140mm, GT60-152mm etc.
For more information please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschen.net ; http://www.roschen.cn
http://www.roschen.com ; http://www.roschengroup.com
