BQ HQ NQ PQ Core Barrel , 1.5M Double tube core barrel for
exploration core drilling
Wireline Core Barrel
Wireline Drilling Core Barrel
Wireline Drilling Core Barrel BQ HQ NQ PQ
Wireline Drilling Core Barrel BQ HQ NQ PQ , Double tube core barrel
1.5 meter for exploration core drilling
Wireline Drilling Core Barrel BQ HQ NQ PQ
Wire-line core drilling tools can lift core from drill rods without
picking up coring system. A complete set of wire-line drill tools
include: Core barrel assembly, overshot assembly, drill rods,
holding dog, hoisting plug, circle wrench etc. It has some
advantages such as high penetration rate, high core recovery ratio,
long bit life and lower labour intensity. The advantages can get
more clear with the increasing of drill hole depth.
We could supply BQ Core Barrel, NQ Core Barrel, HQ Core Barrel, PQ
Core Barrels,
Specifications
Wireline drilling tool
1. ISO certificate tool
2. API standard tool
3. Drilling NQ.HQ etc.bit
4. Good After sales service
Wireline Q series Core Barrel
Wireline drilling is the special method of removing the core.
When the driller wants to remove core from a conventional core
drill, the entire core barrel has to be removed from the hole. This
is time-consuming, as each rod has to be removed one at a time.
With wireline drilling, a barrel of core can be removed from the
bottom of the hole without removing the rod string. When the
driller wants to remove the core, an overshot is lowered on the end
of a wireline. The overshot attaches to the back of the core barrel
inner tube and the wireline is pulled back and the inner tube
disengages itself from the barrel.
1.5m and 3.0m length core barrels are avaiable.
We will feel happy to give you a quotation upon receipt of your
detailed requirements.
Core barrel introdution:
Used in loose, broken stratigraphic or coal extraction and protect
rock (mine) heart of drilling tools.
Double core tube and tube has outer pipe, rinses through joint
between the internal and external tube water flow to the bottom of
the hole, protecting cores from rinses washouts. Double core tube
has double motion and single movement two kinds. Double motion and
core tube is internal and external core tube following bit and
drill stem rotation, it in no serious loose or broken strata.
Single movement double core tube internal and external tube has
bearing isolation, pipe outer pipe driven only pick up bit
rotation, and broken rock tube does not rotate, avoid to core
friction, vibration, etc., with mechanical damage, so it in serious
loose fractured formations.these, can be well protected cores.
Use double deck core tube take core, bits need to use wall
thickness of the alloy drill or diamond bits.
Due to the rock drill contact surface area increased and the lip
use double deck core tube than ordinary core tube drilling
efficiency to reduce. In the ledge, coal, in order to guarantee
rock (mineral) heart take rate, rules must be use double deck core
tube coring. More complex double core tube, except to finish single
movement, in addition, aluminum, steel tube placed plastic or
qualitative buckled half close tube, have a better protection of
the core role.
Double core tube card broken cores and seal block within the next
port, the core tube by the drill is placed in the core card fault
device (fern, card spring, claw reed, etc.) to finish.
