Plastic Soil Core Catcher soft sample drilling , Plastic Core Basket

Plastic Core Basket 4-1/2" used for PQ3 drill rods retains loose , soft sample drilling in soil sands formations

Plastic Core Basket 4-1/2" used for PQ3 drill rods prevent water bearing sands from entering hollow stem auger

Plastic catcher 3-1/2" used for NQ3 Rods prevent water bearing sands from entering hollow stem auger


Plastic lifter 4-1/2" used for NQ3 Rods prevent water bearing sands from entering hollow stem auger

Basket core catcher 2-1/2" retains loose , soft sample drilling in soil sands formations

Core catcher 3-1/2" retains loose , soft sample drilling in soil sands formations

Plastic soil core catcher 4-1/2" used for PQ3 Rods prevent water bearing sands from entering hollow stem auger

GLOBAL LARGEST PLASTIC CORE CATCHER, CORE LIFTER, BASKET RETAINER SUPPLIER


Introductions:
Steel Basket Core Barrel Bits Usage: Loose, soft formations – use in conjunction with steel core basket

Plastic Basket Core Barrel Bits Usage: Loose, soft formations – use in conjunction with plastic core basket

Plastic Core Basket Usage: Retains loose, soft sample – use in conjunction with plastic basket core barrel bits

Plastic Core lifter can be used to prevent water bearing sands from entering the hollow stem auger I.D. during drilling, while continuing to allow for the sampling tube to pass through.
Additional sizes and styles are available on request.

Further technical parameters, pls contact us ROSCHEN, and get details information via roschen@roschen.com




Keywords:
SPT hammer
SPT hammer types
SPT hammer efficiency
SPT hammer weight
SPT hammer anvil
SPT hammer calibration
SPT hammer efficiency factors
SPT hammer energy measurements
spt hammer types
automatic spt hammer
spt hammer weight
spt hammer calibration
spt n values
spt energy
spt correction
automatic hammer
Standard Penetration Test
SPT Hammer Calibration
Spt Hammer, Spt Hammer Suppliers and Manufacturers
SPT Hammer Calibration
SPT Automatic Hammmer
Drilling World
Automatic SPT Hammer
SPT: Standard Penetration Test Energy Calibration
Standard penetration test
CME Automatic Hammer Operations Bulletin DSO-99-03
Evaluation of SPT energy for Donut and Safety hammers
SPT Hammer Energy Ratio versus Drop Height
SPT Energy Measurements: Manual vs. Automatic Hammer
Standard Penetration Test (SPT) Correction
Auto Standard Penetration Test (SPT) Hammers
SPT Automatic Drop Hammer: Environmental, Geophysical
Auto Hammer
Energy Efficiency and Rod Length Effect in SPT Drilling
Evaluation of SPT Hammer Energy Variability
NOTES on the STANDARD PENETRATION TEST
UT100 and SPT Hammers
Drilling Supplies
Spt Automatic Trip Hammer, Spt Tools
standard penetration test, SPT
Standard Penetration Testing Tools
Geoprobe Systems
Automatic Spt Hammer
Hydraulic Spt Hammer, Hydraulic Spt Hammer
Calibration
Geotechnical Drilling
Automatic SPT Hammer,SPT Hammer Types manufacturer
Drilling Services,SPT Calibrations
NCDOT SPT HAMMER ENERGY MEASUREMENT
Hydraulic Spt Hammer, Hydraulic Spt Hammer
SPT Hammer Energy Ratio versus Drop Height
SPT hammer, high quality Manufacturers,Suppliers
SPT Automatic Hammer Efficiency Revisited
SPT Hammer, SPT Automatic Trip Hammer
SPT AUTO TRIP HAMMER - KUVAWALA CORE DRILL
Standard Test Method for Standard Penetration Test (SPT soil sampling)
Soil Sampling Tools - Drilling World
SPT Hammer Energy Ratio versus Drop Height
Spt Hammer - Spt Hammer Manufacturers, Suppliers
1.8m - 2.6m Automatic SPT Hammer Standard Penetration
Effect of SPT Hammer Energy Efficiency in the Bearing
Spt Hammer Complete
Evaluation of SPT energy for Donut and Safety hammers
GRL Services SPT Hammer Calibration
DH66 Automatic Drop Hammer
Automatic SPT Hammer,Soil testing engineering
Geotechnical Drilling
Mobile Drill Tooling Catalog UPDATED 2015 Reduced
SPT Hammer Energy Analyser
DH66 Automatic Drop Hammer
Spt Hammer Exporters, Spt Hammer Selling Leads
China SPT Hammer - China Spt Hammer, Drilling Tools
EVALUATION OF THE CONE PENETROMETER TEST FOR SPT .
China Soil Testing Spt Automatic Trip Hammer Complete
SPT Hammer Energy Measurement
SPT Hammer Energy Measurements
STANDARD PENETRATION TEST
Subsurface Exploration Using the Standard Penetration Test and the Cone Penetrometer Test
Subsurface Exploration Using the Standard Penetration Test
Site Exploration, Site Characterization, Subsurface Exploration, Drilling, Standard Penetration Test, Cone Penetrometer
The Standard Penetration Test (SPT) and Cone Penetrometer Test (CPT) have become industry standards for subsurface geotechnical investigations using small diameter (<8-in. [20-cm]) borings and soundings. Both procedures have evolved over a period of 100 and 70 years, respectively, and have been adopted as ASTM standards. Each procedure has certain advantages over the other, but both can elicit incorrect data under particular subsurface conditions that are often overlooked, depending on the experience of field personnel operating or logging the tests. This paper seeks to explain the operative assumptions employed in both procedures, highlight the various corrections that are commonly employed, and warn the reader of common errors in interpretation.

The article concludes by stating that, under most conditions, the joint employment of SPT and CPT together has the greatest potential for characterizing sites correctly.
ASTM D1586 - 11
Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils



FAQ

Terms & Conditions of Ordering:

Quality warranty:
Our products are made of high quality steel and all spares parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion.

Package:
Using ply-wooden cases and pallet for package to protect the products and avoid the damage during transportation. Also we can customize package according to your special requests.

Production time:
Generally need 15-25 days

Transportation:
By air, By Express or By sea according to your requests.

1. Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight

2. Handling time for an order
Based on order quantity, normally it takes 20 days for production.
in 3 working days after receiving the advance payment

3. Shipping way
Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air
Bulk order: we suggest by air or by sea.

4. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.

5. After Services:
a. Our sales team will response for your question within 24 hours (Holidays Excluded)
b. Technical Support will be available in any time

6. Quality & Service:
There will be strict inspection and testing for every order before shipping out.







For more information, please contact:


ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED

Skype: ROSCHEN.TOOL , ROSCHEN_GROUP

WeChat: +86-137 6419 5009 ; +86-135 8585 5390

WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390

Email: roschen@roschen.com ; roschen@roschen.net

Website: http://www.roschen.com ; http://www.roschen.net
http://www.roschen.cn ; http://www.roschendrill.com

 ROSCHEN GROUP

ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mineral tools, equipment products quality stable and reliable.

ROSCHEN Group Limited is a manufactory with years of research and development for the mining, mineral tools, equipment. We are capability to produce high performance world class products and control excellent quality. Our main product includes tricone bit, diamond core bits, drill pipe, core barrel, TCI tricone bit, mill tooth tricone bit, RC hammer, DTH bit, etc.

ROSCHEN Manufactory PROCESS

ROSCHEN Sales Value Growing Up!

ROSCHEN'S MISSION

1. Strive to create and supply Best quality products for the industry that last longer than the average products.

2. Provide excellent service for our clients.  24 hour-7 days /week schedule to get our clients what they need – FAST.