17 1/2'' Tricone Bit Milled Tooth IADC 115
17 1/2'' Cone Size Mill Tooth Tricone Bit IADC 115 With Great Wear
High Resistance for soft formation drilling
Product Discription
Milled tooth Tricone Rock Drill Bits:
| Cone Size | 17 1/2" |
| Bearing Type | Elastomer Sealed Bearing |
| Tooth Type | Steel /Milled |
| Circulation Type | Mud Fluid |
| Thread Connection | 7 5/8 Reg Pin |
| Gauge Protection | Unavailable |
| Shirttail Protection | Unavailable |
The milled tooth (steel tooth) tricone bits drilling for soft to
medium rock formation.
The medium formation milled tooth tricone bits are used to drill
high compressive strength, medium rock formation. Shoot projection
teeth with reduced crest length are used in this series of bit
designs. Durable hard facing is applied to reduce tooth wear.
The soft formation milled tooth tricone bits are used to drill low
compressive strength, soft formation. Long projection tooth lengths
are used on high offset cones to provide the greatest penetrations
rates possible. Wear resistance hard facing is used to control
tooth wear. On the softest bit types this hard facing completely
covers the bit teeth.
Main features
- The wear-resistance of teeth is enhanced with premium tungsten
carbide hard facing on the tooth surfaces for steel tooth bit.
High precision roller bearing with two thrust faces. Ball lock the
cone. Thrust faces hard-face with wear resistant alloy. Abrasion
resistance and seizure resistance of the bearing are improved.
- Multiple gauge protection with gauge trimmers on the heel and gauge
inserts on the gauge surface of the cone, tungsten carbide inserts
and hard-facing on the shirttail increases gauge holding capability
and bearing life.
Specification
Tricone bits , hole openers can be used to explore /drill
gas/oil/geothermal/water wells. 3 7/8”~26” are available for Tricone bits. 4 1/2”~17 1/2” are
available for Diamond PDC bits.
The TCI Tricone Bit ranges in size from 3.875” (88.9mm) to 28”
(711.2mm)
The Mill Tooth TriCone Bit ranges in size from 5” (127mm to 32”
(812.8mm)
| RPM (r/min) | 180~60 |
| WOB(KN) | 134~334 |
| Application | Very soft formation with low compressive strength ,and high
drillability ,such as clay, mudstone,chalk,etc. |
About us
Our goal is provide the best quality products and service to our
customers,we have professional R&D team,domestic advanced
production equipment and precision instruments Reduce the
cost,Speed the drilling,Guarantee the safety is always our aim.
Win-win cooperation is our ultimate pursuit. Contact us feel free
if you are finding drill bit manufacture.
Our extensive product line includes DTH and reverse circulation
hammers and bits, tricone bits, adaptor subs, air perforators, well
casing, drill steel, casing alignment clamps and torch guides,
diverter boxes, shock absorbers, retract hammers, thread lubes,
oilers, as well as a comprehensive line of Matex environmentally
friendly foamers, rock drill oils, polymers, and more.
Our service
We are manufacture can supply good quality goods and competitive
price
We not only have ourselves design but also can accept customization
We have fast and on time delivery time
Every bits have it's quality assurance
Contact our anytime if you have any question with bits.
24 hours on time reply
For more information please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschen.com ; http://www.roschen.net
