Sign In | Join Free | My himfr.com
Home > Down The Hole Hammer >

Secoroc COP 54 Down The Hole Hammer For Blast Hole Drilling Sealed Bearing

ROSCHEN GROUP
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap Secoroc COP 54 Down The Hole Hammer For Blast Hole Drilling Sealed Bearing from wholesalers
     
    Buy cheap Secoroc COP 54 Down The Hole Hammer For Blast Hole Drilling Sealed Bearing from wholesalers
    • Buy cheap Secoroc COP 54 Down The Hole Hammer For Blast Hole Drilling Sealed Bearing from wholesalers
    • Buy cheap Secoroc COP 54 Down The Hole Hammer For Blast Hole Drilling Sealed Bearing from wholesalers

    Secoroc COP 54 Down The Hole Hammer For Blast Hole Drilling Sealed Bearing

    Ask Lasest Price
    Brand Name : ROSCHEN
    Model Number : Secoroc COP 54
    Certification : API
    Price : negotiate
    Supply Ability : 10000pcs/M
    • Product Details
    • Company Profile

    Secoroc COP 54 Down The Hole Hammer For Blast Hole Drilling Sealed Bearing

    Secoroc COP 54 Gold down-the-hole hammer for Blast Hole Drilling


    ROSCHEN is rock drilling tools manufacturer, As for rotary drilling tools, we have complete product line of tricone bit which are available in steel tooth and tungsten carbide insert, size from 3 3/8''(85.7mm) to 26''(660.4mm) for use in all formations, with any bearing/seal type, and a wide range of additional custom features.


    ROSCHEN DTH Hammers Technical Specifications
    Hammer SizeBit ShankROSCHEN CodeConnection ThreadSuitable bitWorking pressureAir consumption
    2"BR2ROS 11 ROS 22RD50 box¢70-¢90mm0.7-1.75Mpa0.7Mpa4.5m3/min
    1.0Mpa4m3/min
    1.4Mpa5m3/min
    3"DHD3.5ROS 32API 2 3/8" Reg¢90-¢110mm1.0-1.5Mpa1.0Mpa4.5m3/min
    COP32/COP34
    M301.5Mpa9m3/min
    4"DHD340ROS 34API 2 3/8" Reg¢110-¢135mm1.0-2.5Mpa1.0Mpa6m3/min
    COP44
    QL40
    SD41.8Mpa10m3/min
    M402.4Mpa15m3/min
    5"DHD350ROS 52 ROS 54API 2 3/8"Reg/ API 3 1/2" Reg¢135-¢155mm1.0-2.5Mpa1.0Mpa9m3/min
    COP54
    QL50
    SD51.8Mpa15m3/min
    M502.4Mpa23m3/min
    6"DHD360ROS 62 ROS 64API 3 1/2" Reg¢155-¢190mm1.0-2.5Mpa1.0Mpa10m3/min
    COP64
    QL60
    SD61.8Mpa20m3/min
    M602.4Mpa28.5m3/min
    8"DHD380ROS 82 ROS 84API 4 1/2" Reg¢195-¢254mm1.0-2.5Mpa1.0Mpa15m3/min
    COP84
    QL801.8Mpa26m3/min
    SD82.4Mpa34m3/min
    M80/M85
    10"SD10ROS 100API 6 5/8" Reg¢254-¢311mm1.0-2.5Mpa1.0Mpa22m3/min
    Numa1001.8Mpa40m3/min
    ROS 1002.4Mpa55m3/min
    12"DHD1120ROS 120API 6 5/8" Reg¢305-¢445mm1.0-2.5Mpa1.0Mpa30m3/min
    SD121.8Mpa56m3/min
    Numa 1202.4Mpa78m3/min
    15"Numa 150ROS 150API 6 5/8"Reg¢530mm-¢660mm1.0-2.5Mpa1.0Mpa30m3/min
    DHD11501.8Mpa56m3/min
    QL1502.5Mpa78m3/min
    18"Numa 180ROS 180API 6 5/8"Reg¢600mm-¢860mm1.0-2.5Mpa1.0Mpa30m3/min
    DHD11801.8Mpa56m3/min
    QL1802.5Mpa78m3/min
    24"Numa 240ROS 240API 6 5/8"Reg¢775mm-1000mm1.0-2.5Mpa1.0Mpa30m3/min
    QL 2401.8Mpa56m3/min
    SD 242.5Mpa78m3/min
    Notes:
    Any Spline is available
    API, Metzke, Remet , Fabe thread is available!
    Any special typ shank of DTH Hammer will be available by requests.



    Tricone drill bits include Steel Tooth (also referred to as milled tooth) bits and Tungsten Carbide Insert (TCI) bits, TCI bits are much more durable than Steel Tooth ones, but carry a higher cost to manufacture. Both these two groups of Tricone Bits are available with:

    (1) Open Bearing or Sealed Bearing

    (2) Roller Bearing or Friction Bearing (Journal Bearing)

    (3) Gage Protected or Non-Gage Protected, etc




    Features:

    1. The tricone roller bit working life is according the drilling formation and the drilling rig.


    2. Rock formation: Very soft with low compressive strength and high drill ability, such as shale, clay, sandstone and conglomerate, etc.


    3. Journal bearing. Hard faced bearing surface. Inner hole of cone is silver-plated. The load capacity and seizure resistance of the bearing is greatly improved.


    4. O ring seal is made of the more wear resistant and high saturated buna-N with the increased seal section and precisely designed scaling flange in the cone sealing area has increased the reliability of the seal.


    5. All rubber compensator is used which can limit pressure differential and prevent drilling fluid from entering the lubrication system and this provides the bearing system with good assurance of lubrication.


    6. High wear resistance and excellent cutting ability of the insert bit are given full play by using carbide compacts of high strength and high toughness in combination with optimized compact numbers and rows, the exposure height and special shaped compacts. For steel booth bit, the tooth surface is hard faced with new type of wear resistant material and thus has extended working life of the cutting structure while still maintaining high ROP.


    ROSCHEN offers heavy duty tricone roller bits to meet your customized drilling needs. We have classified the bits based on their diameter (footprint), International Association of Drilling Contractor number (IADC number) and American Petroleum Industry number (API Number). The IADC number further classifies the tricone bits based on the tooth material of construction, suitability for drilling into soft, medium or hard rock and bearing type used. ROSCHEN can offer tricone bits for all possible combinations of IADC number.


    Website: https://roschen.com

    Quality Secoroc COP 54 Down The Hole Hammer For Blast Hole Drilling Sealed Bearing for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: ROSCHEN GROUP
    *Subject:
    *Message:
    Characters Remaining: (0/3000)